 |
TBX –STAINLESS STEEL BIMETAL THERMOMETERS
Thermometers completely in stainless steel for any kind of industrial applications; they are suitable for
chemical, pharmaceutical and food industry and in any hard conditions with corrosive substances.
They are formed by a stailess steel tube in which there is a bimetal helical spiral that gets deformed
under temperature variations. DIAL SIZE (DS): mm 80 – 100 – 150
CASE AND RING: AISI 304 stainless steel with bayonet clutch Range: from – 50/50 to 0/500 °C
download datasheet |
 |
MTS series – bimetal thermometers with stainless steel case
The bimetal thermometers are suitable where ambient corrosion is a major concern and can be
used in food, beverage, pharmaceutical, chemical industries. Suitable for the outside installation
thanks to the stainless steel case.
They are available as:
Ø60mm; Ø80mm; Ø100mm; Ø150mm. Ø200mm.
download datasheet Ø 60
download datasheet Ø 80
download datasheet Ø 100
download datasheet Ø 150
download datasheet Ø 200 |
 |
MT series – bimetal thermometers standard version
These instruments are suitable for food, beverage, pharmaceutical, chemical petrolchemical, heating and ventilating sytems. They are built to resiste the most severe operating conditions created by the environmet and process medium. They are available as: Ø60mm; Ø80mm; Ø100mm; Ø150mm.
download datasheet Ø 60
download datasheet Ø 80
download datasheet Ø 100
download datasheet Ø 150
|
 |
TQX –LOCAL INERT GAS THERMOMETERS
These gauges are particulary suitable in the food and pharmaceutical industry, since no mercury is present. They are completely in stainless steel and can be mounted without restrictions of use.
DIAL SIZE (DS): mm 80 – 100 – 150 – 200
CASE AND RING: AISI 304 stainless steel with bayonet clutch
MOVEMENT : AISI 304 stainless steel
Range: from – 50/50 to 0/600 °C
download datasheet
|
 |
TMX –REMOTE INERT GAS THERMOMETERS
These gauges are particulary suitable in the food and pharmaceutical industry, since no mercury is present. They are completely in stainless steel and can be mounted without restrictions of use.
DIAL SIZE (DS): mm 80 – 100 – 150 – 200
CASE AND RING: AISI 304 stainless steel with bayonet clutch
MOVEMENT : AISI 304 stainless steel
Range: from – 50/50 to 0/600 °C
download datasheet |
 |
RECTANGULAR WATERING THERMOMETERS SERIES TS
Glass thermometer protected by rectangular metallic case, these instruments are used in oil rafineries, sugar mills, petrolchemical and conditionning plants, as well as wherever such an accurate indication is required wich only a glass thermometer can be given. |
 |
CIRCULAR SECTION THERMOMETER SERIES TC
Jacket in normal glass for temperature up to 400 °C, in JENA 2954 III and Supremax glass (nitrogen pressure) for temperature until to 600°C.
RANGE:
-30 +50 / -10 +50 / 0 +100 / 0 +150 / 0 +200 / 0 +300 / 0 +400 / 0 +500 / 0 +600°C |
 |
SOLID GLASS THERMOMETER SERIES TP
Industrial thermometers with a rectangular case, of modern and sturdy construction. Capillary in solid glass, mounted in a alluminium case, with a graduation incided over the capillary and over the
case. Thermowells are supplied in brass and stainless steel AISI 316.
These instruments are manufacted in three model, with a different lenght: 110 - 150 - 200 mm. |
